2 Remove the transport screw (turn counterclockwise) from the Shipping

position (upper hole) at the rear of the library, and then set it in the Operation position (lower hole) with a screw driver or coin.

Transport screw

Operation position

Checking the Package Contents

After opening the package, make sure all of the following items are present.

Contact your dealer if anything is missing.

•LIB-81 AIT Library (1)

•Power cable (1)

•SCSI terminator (1)

•Quick Start Guide (1)

•Air Filter (ACY-FL81) (4)

•Bar code labels (1 sheet; only supplied with models equipped with a bar code reader)

•Safety Notice (1)

Note

In addition to the above, other documentation, cables, and cleaning cartridges may also be included.

Preparing the Host Computer

To prepare the host computer before installing the AIT library:

1

2

Make sure that a SCSI host adapter card is installed in the host computer.

Install the application software supporting the library on the host computer.

For guidance on application software that can be used with the AIT library and supported operating systems, contact your dealer.

Chapter 2 Installation

14