Configuration Menu

The date and time, warning message displayed, bar code, R-MIC and brightness of the LCD panel can be configured.

t“Basic Settings” (page 43) of this chapter.

The following submenus are in the Configuration Menu.

 

MENU

 

Configuration

 

ENTER

 

Date & Time

Sequential Mode

Warning

LCD Contrast

Bar Code

 

R-MIC

•“Date & Time”

Set the date and time.

•“Warning”

Set whether or not to display the life warning (given when a specific part has been operated more times than the specified number of times).

•“Barcode”

If you are using a model equipped with a bar code reader, configure so that the bar codes affixed to cartridges can be read.

•“R-MIC”

If you are using a model equipped with an R-MIC reader, only enable the R-MIC function if you use AIT-5, AIT-4, AIT-3 Ex, or AIT-3 cartridges, or AIT cartridges with R-MIC.

•“LCD Contrast”

Set the brightness of the LCD panel.

•“Sequential Mode”

Activate the sequential mode.

Caution

There exist LIB-81 AIT library models without bar code or R-MIC readers. Make sure that your library is equipped with a bar code and/or R-MIC reader before modifying the “Barcode” or “R-MIC” setting. Modifying these settings when using LIB-81 AIT library models that are not equipped with the appropriate readers generates errors.

Chapter 3 Basic Usage 38