15

16

17

When “[ENTER] to activate” appears, press the [ENTER] button.

The cartridge dock shutter opens.

Insert the cartridge into the slot.

Be sure to insert it all the way.

If you selected “1. Single Mode” in step 13, press the [CANCEL] button.

Slot 01

[ENTER] to activate

Slot 01 Insert Tape [CANCEL] to exit

Note

Even if you selected “1. Single Mode” in step 13, you can insert a different cartridge by using the V and v buttons to select the slot element address, and then pressing the [ENTER] button. Because you did not select “2. Multiple Mode” in step 13, the cartridge dock shutter closes and reopens. When it does, you can insert another cartridge as explained above. If you do so, when you are done inserting cartridges press the [CANCEL] button and proceed to step 19.

Chapter 4 Operating the AIT Library

57