With the ACY-RK81 rack mounting kit (sold separately), the AIT library can be installed on an EIA-standard, universal pitch 19-inch rack. Contact your dealer for information about the rack mounting kit.

Note

Install the AIT library on a horizontal surface near an AC power outlet. Also, leave a gap of about 150 mm (5.9 in.) behind the rear of the unit to allow air to circulate.

Rear

150 mm

(5.9 in.)

Front

430 mm

(16.9 in.)

660 mm (26.0 in.)

Connecting the Power Cable

1 Confirm that the power switch on the rear of the AIT library is turned off (a is pressed).

2 Connect one end of the power cable to the power supply connector and the other end to the power outlet.

Chapter 2 Installation

16