8 When [[ENTER] to activate] |
|
Domain | |
appears, press the [ENTER] button. | XXX |
The display returns to “Network”. | [ENTER] to activate |
|
9 When you want to set the IP address, select “3.IP Address”, then press the [ENTER] button.
10
11
•Select “YES” to use the IP address assigned to the DHCP server. Then proceed to step 12.
•Select “NO” to use the fixed IP address. Then proceed to step 10.
When the “IP” setting flashes, use the V button, the v button, the [ENTER] button and the [CANCEL] button to set the IP Address, then press the [ENTER] button.
When the “Mask” setting flashes, use the V button, the v button, the [ENTER] button and the [CANCEL] button to set the subnet mask, then press the [ENTER] button.
12 When [[ENTER] to activate] |
|
|
DHCP | YES | |
appears, press the [ENTER] button. | IP | 000.000.000.000 |
| Mask | 000.000.000.000 |
The display returns to “Network”. | [ENTER] to activate | |
|
| |
13
14
When you want to set the default gateway, select “5.Gateway”, then press the [ENTER] button. (However, the AIT library does not support the default gateway setting.)
When the “Gateway” setting flashes, use the V button, the v button, the [ENTER] button and the [CANCEL] button to set the IP address for the default gateway, then press the [ENTER] button.
15 When [[ENTER] to activate] |
|
Gateway | |
appears, press the [ENTER] button. | 000.000.000.000 |
The display returns to “Network”. | [ENTER] to activate |
|
16 When you want to obtain the MAC address, select “6.MAC Information”, then press the [ENTER] button.
The MAC address is displayed. |
| |
MAC Address | ||
| ||
| ||
|
|
17
18
Press the [CANCEL] button twice to return to the status display.
Use the V and v buttons to select |
|
| |
Menu | 12:34 | ||
“9. System Down”, then press the | |||
7.Tape Inventory |
| ||
[ENTER] button. | 8.Password |
| |
| 9.System Down |
|
Chapter 2 Installation | 31 |
|
|