01:12345678 02:No Tape

When the AIT library is equipped with a bar code reader, the bar code information is only displayed when the bar code setting is “YES” or “Enable”.

•When a cartridge is not set, “No Tape” is displayed.

•If a cartridge with no bar code information is set, nothing is displayed.

•Press the V button to view the next element address information, and press the v button to return to the previous display.

01:12345678

02:No Tape

4 To view the R-MIC information, select “2.R-MIC”, then press the [ENTER] button.

The R-MIC information is only displayed if you are using an AIT-3, AIT-3 Ex, or AIT-4 model and the R-MIC setting is “YES” or “Enable”.

•When a cartridge is not set, “No Tape” is displayed.

•If a cartridge with no R-MIC information is set, nothing is displayed.

•Press the V button to view the next element address information,

and press the v button to return to the previous display.

5 Press the [CANCEL] button three times to return to the status display.

Chapter 4 Operating the AIT Library

61