5 When “[ENTER] to activate” appears, press the [ENTER] button.
The brightness of the LCD panel is now set. The display returns to the menu.
LCD Contrast
■■■■
[ENTER] to activate
6 Press the [CANCEL] button twice to return to the status display.
Using the Sequential Mode
Depending on your software, you can elect to activate the sequential mode in “Sequential Mode” of the Configuration Menu.
By activating the sequential mode, you can use the software to automatically instruct the library to return an ejected cartridge to its original slot and insert the next cartridge into the AIT drive. You can also adjust the settings so that if the library finds no cartridge in the next slot it inserts the next cartridge in the sequence into the AIT drive. It is also possible to make continuous unloading settings.
Caution
•You must use customized software to be able to use this function. Under normal circumstances, do not use the sequential mode.
•You can only make continuous unloading settings when the sequential mode is active.
1
2
At the status display, press the [MENU] button for 2 second.
Use the V and v buttons to select |
|
| |
Configuration | 12:34 | ||
“5. Configuration”, then press the | |||
| |||
[ENTER] button. |
| ||
5.LCD Contrast |
| ||
| 6.Sequential Mode | ||
3 Select “6. Sequential Mode”, then press the [ENTER] button.
“Sequential Mode” appears.
Sequential Mode 12:34
Sequential Mode NO
Unload Continue NO
4 When the “Sequential Mode” setting blinks, use the V and v buttons to select “YES”, then press the [ENTER] button.
By default, this is “NO”. If you do not want use the sequential mode, leave this setting to “NO”.
5 When the “Unload Continue” setting blinks, use the V and v buttons to select “YES”, then press the [ENTER] button.
By default, this is “NO”. If you do not want use the continuous unloading function, leave this setting to “NO”.
Note
If you do not set “Sequential Mode” in step 4 to “YES”, you cannot change the “Unload Continue” setting.
6 When “[ENTER] to activate” appears, press the [ENTER] button.
Press the [CANCEL] button twice to return to the status display.
Chapter 3 Basic Usage 46