At the status display, press the [MENU] button for two seconds.
At the status display, press the [MENU] button for two seconds.

If you change this setting to “YES”, it will take longer for the inventory to be completed when the AIT library starts or when you set a cartridge.

Note

The R-MIC function can also be set through a browser.

1

2 Use the V and v buttons to select “5.Configuration”, then press the [ENTER] button.

3

Select “4.R-MIC”, then press the

 

 

Configuration

12:34

[ENTER] button.

4.R-MIC

 

 

5.LCD Contrast

 

 

6.Sequential Mode

4

Use the V and v buttons to select “YES”, then press the [ENTER] button.

The default factory setting is “NO”. Select “NO” to not use the R-MIC function.

R-MIC Enable YES

5 When “[ENTER] to activate” appears, press the [ENTER] button.

The R-MIC function is now set. The display returns to the menu.

R-MIC

Enable YES

[ENTER] to activate

6 Press the [CANCEL] button twice to return to the status display.

Adjusting the Brightness of the LCD Panel

In “LCD Contrast” of the Configuration Menu, adjust the brightness of the LCD panel.

1

2 Use the V and v buttons to select “5.Configuration”, then press the [ENTER] button.

3

4

Select “5.LCD Contrast”, then press

Configuration

12:34

the [ENTER] button.

4.R-MIC

 

 

5.LCD Contrast

 

 

6.Sequential Mode

Press the V and v buttons to adjust

 

 

LCD Contrast

 

LCD contrast, then press the

 

 

[ENTER] button.

 

 

Pressing the V button darkens the

 

 

 

 

LCD panel, while pressing the v

 

 

button makes it brighter.

 

 

Chapter 3 Basic Usage 45