18 If you selected “2. Multiple Mode” in step 4, perform the following depending on the number of open slots.

Two or more open slots

The slot moves to the next one. When it stops, insert another cartridge and press the [ENTER] button again. Repeat until all the cartridges are inserted, then press the [CANCEL] button.

1 Insert a cartridge and press the [ENTER] button.

2 The slot moves to the next. Insert another cartridge in the same manner and press the [ENTER] button.

When you press the [ENTER] button, the slot moves to the next.

3 Repeat until all the cartridges are inserted, and then press the [CANCEL] button.

Insert Tape Slot 01

Next Slot 02

[CANCEL] to exit

[ENTER] to next slot

Only one open slot

The element address of the front slot appears on the first line. (Nothing appears on the second line.)

1 Insert a cartridge and press the [CANCEL] button.

Insert Tape Slot 01

[CANCEL] to exit

Caution

Do not put your fingers in the slot when it is moving, as this could result in injuries.

19 When “[ENTER] to activate” appears, press the [ENTER] button.

If you selected “1. Single Mode” in step 4, the display on the right appears.

Slot 01

Exit ?

[ENTER] to activate

If you selected “2. Multiple Mode” in step 4, the display on the right appears.

Insert Tape Slot 01 Exit ?

[ENTER] to activate

The shutter closes and the initialization is performed.

Caution

Keep your fingers clear of the shutter when it closes.

Slot 01

Initializing

20 When the initialization ends, press the [CANCEL] button three times to return to the menu display.

Chapter 4 Operating the AIT Library

58