1 Press the power switch to turn off the power.

2 Use a pointed object such as a machinist’s screwdriver to change the settings of the DIP switches.

3 Press the power switch to turn on the power.

Connecting SCSI Peripheral Devices

SCSI peripheral devices can be connected to the SCSI connectors of the AIT library. The SCSI configuration of the library is as shown below. Connect the devices according to the system environment.

Library

SCSI Connector 2

AIT Drive

SCSI Connector 1

Library

Controller

Notes

•The default factory settings of the SCSI IDs are as follows.

-Library: 0

-AIT Drive: 1

•Do not use repetitive SCSI IDs.

Turning the Power On/Off

Turn the Power On

Turn on the AIT library power, then turn on the host computer power.

Chapter 2 Installation

19