At the status display, press the [MENU] button for two seconds.

Setting the Bar Code

You should only configure “Barcode” of the Configuration Menu so that the bar code labels affixed to cartridges can be read when your AIT library is equipped with a bar code reader. Before modifying this setting, make sure that your LIB-81 AIT library is equipped with a bar code reader.

Caution

When your library is not equipped with a bar code reader, leave this setting to “NO”. If you change the setting to “YES”, “No barcode reader installed” is displayed.

When the AIT library is equipped with a bar code reader but you do not want to use bar codes, leave this setting to “NO”. If you change the setting to “YES”, it will take longer for the inventory to be completed when the AIT library starts or a cartridge is set.

Note

The setting of the bar code can also be configured through a browser.

1

2 Use the V and v buttons to select “5.Configuration”, then press the [ENTER] button.

3

4

Select “3.Barcode”, then press the

 

 

 

Configuration

12:34

[ENTER] button.

1.Date

& Time

 

 

2.Warning

 

 

3.Barcode

 

Use the V and v buttons to select

 

 

 

Barcode

 

 

“YES”, then press the [ENTER]

 

 

Enable

YES

 

button.

 

 

 

The default factory setting is “NO”.

 

 

 

 

 

 

Select “YES” to read the bar code.

 

 

 

5 When “[ENTER] to activate” appears, press the [ENTER] button.

When the bar code is read, the library returns to the menu display.

Barcode

Enable YES

[ENTER] to activate

6 Press the [CANCEL] button twice to return to the status display.

Setting the R-MIC Function

If you are using a model equipped with an R-MIC reader, only enable “R-MIC” of the Configuration Menu if you use AIT-5, AIT-4, AIT-3 Ex, or AIT-3 cartridges, or AIT cartridges with R-MIC. Before modifying this setting, make sure that your LIB-81 AIT library is equipped with an R-MIC reader.

Caution

If your library is not equipped with an R-MIC reader, you are using AIT-2 cartridges without R-MIC, or using AIT-1 cartridges, leave this setting to “NO”.

Chapter 3 Basic Usage 44