The “Error Count” page appears.
In the “Error Count” page, the number of times an operation was tried or an error occurred in the following specific parts are displayed.
•Slider
•Picker
•Turn Table
•Shutter
•Fan
•Drive
Sensor
In “Sensor”, information about the individual sensors, DIP switches and encoder values are displayed.
1 In the Library Administration Menu, click “Maintenance”, then click “Sensor”. You can also directly click “Sensor”, which is located above “Maintenance”.
Note
Each access to the Maintenance Menu requires the password to be entered. Enter the password, then click “OK”. For information about the password, refer to “Password” (page 75).
Chapter 6 Using the Library Administration Menu 79