Sunrise Global CM250 IP manual User’s Manual Editing the Channel Table, Individual Cell Editing

32

PC-IP Software

User’s Manual

Figure 4-5

Editing the Channel Table

Select the channel table to be edited by clicking on the Channel Table tab at the top of the Channel Tables window. Select from STANDARD, CABLE IRC, CABLE HRC, USER 1, USER 2 or USER 3 or any of the International plans. The name of the channel plan may be edited by right clicking on the channel plan tab (name), a pop-up window will appear for the user to type in the desired channel table name.

The Channel Table lists all of the parameters for each channel in the plan including: Channel Number, Frequency, Offset, Active, Modulation type, Symbol Rate, Bandwidth, Video-to-Audio Separation and Secondary Video to Audio Separation.

Individual cells in the table may be edited, channels deleted or additional channels added. To simplify editing channel information, multiple channels may be selected for changes to Offset, Active, Modulation type, Symbol Rate, Bandwidth, Video-to-Audio Separation and Secondary Video to Audio Separation or to add entry rows or delete channels.

Individual Cell Editing

Any individual cell may be edited in an existing channel plan. Double click on the cell to expose the pull-down window as shown in the Figure 4-5 and select the new entry or enter the desired setting. Click on OK to confirm the entry.

Note: Hold down Shift and double click on a group of selected cells to open an editing window for just those cells selected.