Sunrise Global CM250 IP Measurement Data Management, PC Requirements, USB to Serial Port Adapter

2

PC-IP Software

User’s Manual

•Leakage Option – Leakage channel, limit, unit of measure, distance and tag settings.

•RealView – realWORX controller IP address and port settings.

MEASUREMENT DATA MANAGEMENT

The Load feature consists of the following capabilities:

•Load – To view and analyze any of the test results saved in the Install Profiler.

•Load and Save All – To transfer all saved files from the Install Profiler to the selected PC directory.

•Print – To print or copy any of the test result data, graphs or screens from the files stored on the Install Profiler.

•File Save As – To save the viewed file to the hard drive (or other drive) on the PC.

•Delete – To remove files stored on the Install Profiler

PC REQUIREMENTS

PC-IP Software is designed to operate on a PC using Microsoft Windows™ 98, ME, NT, XP or 2000 operating systems. PC-IP is not designed to operate on older Windows™ 95 or 3.x systems. Minimum system requires to install and operate the PC-IP software are:

1.200 MHz Pentium Micro-Processor or better.

2.16M RAM

3.115,200 or 38,400 MB Serial Port (Com1 or Com2)

4.CD-ROM drive

5.Windows™ 98, ME, NT, XP or 2000

USB to Serial Port Adapter

If your PC does not have an RS-232 serial port, use the Belkin model F5U103 adapter to convert a USB port to an RS-232 serial port. Other models may not work properly. Most PDA adapters do not support a full RS-232 implementation and will not work.