Chapter 4
PC-IP Operation
33
Figure
Enter the new Channel ID – one to four alphanumeric digits.
Figure
Select the frequency from the pull down menu or enter the desired frequency.
Figure
Add an offset to the channel’s frequency – plus or minus 3.000 MHz.
Figure
Select Yes to make a channel active in the plan or No to make it inactive. Active channels are tested in the automated SMART tests. Inactive channels may still be tuned manually by entering the channel number. Deleted channels are not available for either tuning method.
Note: Individual cells may be toggled either Yes to No by double clicking on the cell to be changed. Hold down Shift and double click on a group of selected cells to toggle them either Yes or No.
