Chapter 4
PC-IP Operation
51
Figure
Frequency - Double click on the Frequency box to enter the desired frequency for each marker. Any frequency from 5 to 50 MHz (65 MHz for International models) may be entered.
Bandwidth - Double click on the Bandwidth box to enter the desired frequency for each marker. Any bandwidth may be entered from 0, for analog carriers, to 8 MHz for digital carriers. Under or over setting this value will result in erroneous measurements.
Detector - Click on the white detector box to display a pull down menu of the selections: Average for Digital signals or Peak for Analog carriers.
Limits
Pass/Fail limits may be set for the C/I (carrier to ingress), C/N (carrier to noise) ratio calculations and the overall maximum Ingress Limit. Double click on the current setting to enter the new desired settings.
