eIn the case of bar codes other than JAN, EAN, and UPC (Example) CODE39
(Example) UCC/EAN128
(10) Start/Stop Code
yThis parameter is valid only when the type of bar code is CODE39 and NW7.
yWhere the parameter is designated, the program will not check if the transmit print data is with a start code and stop code.
yWhen the parameter is omitted in the case of CODE39 and NW7, a start/stop code will be attached. The code to be added is “*” in the case of CODE39, and “a” in the case of NW7.
yFor details, refer to “Auto Attachment of Start/Stop Code” to be described later in this specification.
(11)Increment/decrement
Printing is performed while the data is incremented or decremented every time a label is issued. Where the data row exceeds the maximum number of digits (40), the data row will not be drawn.
When CODE128 (without auto code selection) is used, the number of the start code (CODE A, CODE B, and CODE C) digits is regarded as 2.
Initial value | 0000 | 0000 | 0000 | 0000 | 999999 | |||||||||
INC/DEC | +10 | +10 | +10 | +10 | +1 | |||||||||
Zero suppression | Not | 5 | 3 | 0 | 3 | |||||||||
designated | ||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
1st label | 0000 | 0000 |
|
| 000 | 0000 | 999999 | |||||||
| ||||||||||||||
2nd label | 0010 | 0010 |
|
| 010 | 0010 |
|
|
|
|
|
| 000 | |
|
|
|
|
| ||||||||||
3rd label | 0020 | 0020 |
|
| 020 | 0020 |
|
|
|
|
|
| 001 | |
|
|
|
|
| ||||||||||
4th label | 0030 | 0030 |
|
| 030 | 0030 |
|
|
|
|
|
| 002 | |
|
|
|
|
| ||||||||||
5th label | 0040 | 0040 |
|
| 040 | 0040 |
|
|
|
|
|
| 003 | |
|
|
|
|
| ||||||||||
- 100 -
