Toshiba B-850 manual Clear Area Command ESC XR

6.3.6 Clear Area Command [ESC] XR

Function

Format

Term

Clears the designated area or reverses the white/black dot pattern in the designated area in the drawing area.

[ESC] XR; aaaa, bbbb, cccc, dddd, e [LF] [NUL]

aaaa:Designated area start point X-coordinate Fixed as 4 digits (in 0.1 mm units)

bbbb:Designated area start point Y-coordinate 4 or 5 digits (in 0.1 mm units)

cccc:Designated area end point X-coordinate Fixed as 4 digits (in 0.1 mm units)

dddd:Designated area end point Y-coordinate 4 or 5 digits (in 0.1 mm units)

e:Type of clear

A:Clears the contents in the designated area to zeros.

B:Reverses the white/black dot pattern in the designated area. (Black area after reversed is evenly solid. )

C:Reverses the white/black dot pattern in the designated area. (Black area after reversed is not evenly printed in black.)

Explanation
			Backing paper
Origin of			Label	Label
coordinates
(0, 0)
		Start point		End point
Effective			Effective
print length			print length
				Start point
		End point
				Origin of
				coordinates
				(0, 0)
		Effective		Effective
0	X	print width		print width
				Y

Paper feed direction			Paper feed direction
Y
	X	0
[Print direction: Printing bottom first]		[Print direction: Printing top first]

Notes

(1)The result is the same even if the start and end point coordinates are reversed.

(2)The result is the same even if the start and end point coordinates are set to an upper right and a lower left points, respectively.

(3)The start and end coordinates of the designated area must be set within the effective print area set by the Label Size Set Command ([ESC] D).

- 44 -