Toshiba B-850 manual

fTransmissive sensor (when using preprinted labels):

Feeding takes place according to the parameter designated by the Label Size Set Command. However, the label-to-label gap is automatically sensed by the transmissive sensor and the stop position is finely adjusted according to the value set by the threshold set operation (key operation).

gLower reflective sensor (when using a manual threshold value)

Feeding takes place according to the parameters designated by the Label Size Set Command. However, the black mark provided on the back of the tag paper is automatically sensed by the lower reflective sensor and the paper position is finely adjusted for every piece, according to the value set by the threshold set operation (key operation).

hUpper reflective sensor (for detecting black marks on the print side of label):

Feeding takes place according to the parameter designated by the Label Size Set Command. However, the black mark provided on the print side of the tag paper is automatically sensed by the upper reflective sensor and the paper position is finely adjusted for every piece.

iLower reflective sensor (for detecting marginal punched holes on the fanfold paper):

Feeding takes place according to the parameter designated by the Label Size Set Command. However, the marginal punched holes (round holes) on the fanfold paper are automatically sensed by the lower reflective sensor. Several round holes are automatically sensed according to the specified pitch length of label, and the paper position is finely adjusted for every piece.

(2)Cut/non-cut

This option is valid in batch feed mode only. (Non-cut is selected in the strip mode for the auto labeler.)

- 143 -