Toshiba B-850 manual Radius of rounded corners ≠

[Rectangle]

(1) Radius of rounded corners = 000 or parameter omitted

(X1,Y1)				(X2,Y2)
	(X2,Y2)	Line width	(X1,Y1)
	Line width			Line width

Line width

(2) Radius of rounded corners ≠ 000

(X1,Y1)

Radius

Line width

Line width

(X2,Y2)

Notes

(1)In line designation, a horizontal line, vertical line, or slant line A/B is drawn according to the start and end point coordinates.

(2)The result is the same even if the start and end point coordinates are reversed.

(3)The start and end point coordinates must be set so that the result of line drawing will be within the effective print area set by the Label Size Set Command ([ESC] D).

- 48 -