(8)Status response
When the option with status response has been selected, a status response is made at the end of printing or if an error occurs.
In the batch issue mode and the cut issue mode, the print end status response is made after printing on the designated number of labels.
*Do not change the parameter for status response/no status response during printing. Otherwise the status response may not be performed properly.
Examples
| 41.0 |
|
| mm |
|
| S a m p l e | 76.2 |
73.2 |
| |
| mm | |
mm |
|
|
| 15.0 mm |
|
| 82.0 mm |
|
Paper feed direction
• Issue count: | 4 pieces |
• Cut interval: | 1 piece |
• Paper: | Tag paper (Reflective |
| sensor used) |
• Issue mode: | Cut issue |
• Issue speed: | 4”/sec. |
• Ribbon: | With |
• Status response: On
[ESC] D0762, 0820, 0732 [LF] [NUL]
[ESC] T11C40 [LF] [NUL]
[ESC] C [LF] [NUL]
[ESC] PC001; 0150, 0410, 1, 1, A, 00, B [LF] [NUL]
[ESC] RC001; Sample [LF] [NUL]
[ESC] XS; I, 0004, 0011C4201 [LF] [NUL]
- 140 -
