Toshiba B-850 manual Or E Strip mode for auto labeler

[D or E: Strip mode for auto labeler]

NOTE: To perform the strip issue for the auto labeler, the backing paper rewind system and the control unit are required on the auto labeler as external equipment.

Strip position Head position

(1) Place paper.

(2) Feeds back to the home position.

(3) Feeding starts

(4) End of feed

(Completes feeding to the top of form and stops)

(4)Feed speed

•A feed is performed at the designated speed.

However, the back feed speed in the cut mode or the strip mode for the auto labeler is 2”/sec.

•The possible feed speed varies according to types and sizes of the paper supply. For details, refer to the Supply Specification.

Parameter	Feed speed
1	2”/sec
2
3
4
5
6	4”/sec
7
8
9
A

(5)With/without ribbon

Without ribbon:	The ribbon motor is not operated at feed.
With ribbon:	The ribbon motor is operated at feed.

(6)If no subsequent command is received from the PC for 1 second after feeding labels, when automatic forward feed standby is set to “ON” in the system mode, the printer automatically performs a 19-mm forward feed. When the Feed Command is received during the automatic forward feed standby, a feed is started after a reverse feed to the original position.

*For notes, refer to the section regarding the Issue Command.

- 145 -