Toshiba B-850 manual None, Xon/Xoff + Ready/Busy, Ready/Busy Dtr, Feed, TYPE1

Parameter

Initial Value

Transmissive sensor manual threshold fine		1.4 V
adjustment value
Reflective sensor manual threshold fine adjustment		1.0 V
value
Type of character code		PC-850
Font of 0		“0” (without slash mark)
Type of control code		Auto
Communication speed		9600 bps
Data length	QP type	8 bits
	QQ type	7 bits
Parity	QP type	NONE
	QQ type	EVEN
Transmission control	QP type	XON/XOFF + READY/BUSY
		(DTR) protocol:
		(XON output when the power
		is on, XOFF output when the
		power is off)
	QQ type	READY/BUSY (DTR)
		protocol
Language for LCD messages	QP type	English
	QQ type	English
Forward feed standby after an issue		ON
Automatic head broken dots check		OFF
[FEED] key function		FEED
Status response		ON
Label pitch		76.2 mm
Effective print length		74.2 mm
Effective print width		216.8 mm
Print type		Thermal transfer print mode
Type of sensor		Transmissive sensor
Feed speed		4”/sec
Issue mode		Batch (without cutting)
PC save automatic call		ON
Kanji code		TYPE1
Euro code		B0H
Centronics ACK/BUSY timing setting		TYPE1
Web printer function		OFF
Silent printing function	QP type	ON
	QQ type	ON
PCL emulation		OFF
Keyboard (KB-80) connection setting		OFF
BASIC interpreter function		OFF
BASIC trace function		OFF

•The total label distance covered, sensor adjustment values (system mode <5>), IP address setting and data of the flash memory card, are not cleared by RAM clear.

- 22 -