Toshiba B-850 manual

~In the case of MaxiCode (Two-dimensional code)

Format

Term

c[ESC] XBaa; bbbb, cccc, d (, e) (, Jffgg) (, Zh) [LF] [NUL]

aa:Bar code number 00 to 31

bbbb:Print origin of X-coordinate of the bar code Fixed as 4 digits (in 0.1 mm units)

cccc:Print origin of Y-coordinate of the bar code 4 or 5 digits (in 0.1 mm units)

d:Type of bar code

Z:MaxiCode (Two-dimensional code)

e:Mode selection (Omissible)

	Omitted: Mode 2
	0:	Mode 2
	1:	Mode 4
	2:	Mode 2
	3:	Mode 3
	4:	Mode 4
	5:	Mode 2
	6:	Mode 6
	7:	Mode 2
	8:	Mode 2
	9:	Mode 2
Jffgg:	Connection setting (Omissible. No connection if this parameter is omitted.)
	ff:	Code number	01 to 08
	gg: No. of divided codes		01 to 08
Zh:	Attachment of Zipper block and Contrast block
	(Omissible. If omitted, they are not attached.)
	h= 0: No attachment of Zipper block and Contrast block
		1: Attachment of Zipper block and Contrast block
		2: Attachment of Zipper block
		3: Attachment of Contrast block

- 92 -