Toshiba B-850 manual Fine Adjustment Value Set Command ESC Z2

6.4.2 Fine Adjustment Value Set Command [ESC] Z2; 2

Function

Format

Term

Sets various fine adjustment values on the printer.

[ESC] Z2; 2, abbbcdddeffghhhijjkllmnnoppqqrr [LF] [NUL]

a:Indicates the direction, forward or backward, in which a feed length fine adjustment is to be made.

+: Backward

-: Forward

bbb:Feed length fine adjustment value 000 to 500 (in units of 0.1 mm) *1

c:Indicates the direction, forward or backward, in which a cut position (or stop position of the strip issue) fine adjustment is to be made.

+: Backward

-: Forward

ddd:Fine adjustment value for the cut position (or stop position of the strip issue) 000 to 500 (in units of 0.1 mm) *1

e:Indicates whether the back feed is to be increased or decreased. +: Increase

-: Decrease

ff:Back feed length fine adjustment value 00 to 95 (in units of 0.1 mm) *1

g:Indicates the direction, positive or negative, in which the X-coordinate fine adjustment is to be made.

+: Positive direction

-: Negative direction

hhh:X-coordinate fine adjustment value 000 to 995 (in units of 0.1 mm) *1

i:Indicates whether to increase or decrease the density in the thermal transfer print mode.

+: Increase (darker)

-: Decrease (lighter)

jj:Print density fine adjustment value (for the thermal transfer print mode) 00 to 10 (in units of 1 step)

k:Indicates whether to increase or decrease the density in the direct thermal print mode.

+: Increase (darker)

-: Decrease (lighter)

ll:Print density fine adjustment value (for the direct thermal print mode) 00 to 10 (in units of 1 step)

m:Fine adjustment direction for the ribbon rewind motor voltage -: Fixed as Negative (The voltage is lowered.)

nn:Fine adjustment value for the ribbon rewind motor voltage 00 to 15 (in units of 1 step)

- 192 -