Notes
(1)The check digit attach, increment/decrement, and zero suppress processes are performed according to the following priority. If any of the conditions is improper, no drawing will take place.
For example, the zero(s) is replaced by a space(s) as a result of zero suppression, but the modulus 10 designated to be attached cannot be calculated.
Increment/decrement > zero suppression > attachment of check digit
(2)Up to 32 fields for which incrementing/decrementing has been designated, can be drawn. If the total of bit map font, outline font, or bar code increment/decrement fields exceeds 32, drawing will take place without incrementing/decrementing any excessive field. The field to be incremented or decremented is incremented or decremented until the Image Buffer Clear Command ([ESC] C) is transmitted.
[Example]
cFormat Command (Increment bar code No. 01 (+1)) d Format Command (Increment bar code No. 02 (+2)) e Image Buffer Clear Command
f Data Command (Bar code No. 01 “0001”) g Data Command (Bar code No. 02 “0100”)
hIssue Command (2 labels)
(0001)
(0100)
(0002)
(0102)
iIssue Command (1 label)
(0003)
(0104)
jImage Buffer Clear Command
kData Command (Bar code No. 02 “3000”) • Issue Command (1 label)
(3000)
- 108 -
