Toshiba B-850 manual

Notes

(1)The print origin of coordinates must be set so that the result of drawing the graphic data will be within the effective print area set by the Label Size Set Command ([ESC] D).

(2)The number of graphic width dots and the number of graphic height dots must also be set so that the result of drawing the graphic data will be within the effective print area set by the Label Size Set Command ([ESC] D) in the same manner as the above.

(3)Both width and height are 11.8 dots/mm.

(4)The actual result of drawing may deviate within ±0.33 mm in the X direction with respect to the designated print origin of the X-coordinate.

To draw the received graphic data at high speed, the data is directly developed in the image buffer without applying correction to each bit with respect to the designated X-coordinate. Consequently, an error of up to 4 bits occurs.

[Effective print area]				[mm]
	Model		B-850
	Method	Batch issue	Cut issue	Strip issue for
Item				auto labeler *1
Effective print width	Min.	10.0	10.0	10.0

		Max.	216.8	216.8	216.8
Effective print	Label	Min.	11.0	23.0	21.4
length		Max.	640.0	640.0	640.0
	Tag	Min.	13.0	23.4	23.4
		Max.	640.0	640.0	640.0

“1: To perform the strip issue for the auto labeler, the backing paper rewind system and the control unit are required on the auto labeler as external equipment.

- 171 -