Toshiba B-850 Idling during the forward feed standby, Reverse feed to the home position, 136

[C: Batch mode (Cut interval: 1, Issue count: 2)]

Automatic forward feed standby is set to “ON (Performed)” in the system mode.

Cut position Head position

A

B

					(1)	Idling (during the forward feed standby)
				(2)		Reverse feed to the home position
	A		(3)			End of printing the 1st label (A)
A			(4)			Feeds the 1st label (A) to the cut position
		(5)				Cuts the 1st label (A)
				(6)		Feeds back to the home position
	B		(7)			End of printing the 2nd label (B)
B		(8)				Feeds the 1st label (A) to the cut position
		(9)				Cuts the 2nd label (B)
				(10)		Feeds back to the home position
						19-mm automatic forward feed
					(11)
						after 1 second

- 136 -