Toshiba B-850 manual Or E Strip mode for auto labeler, End of printing the 3rd label C

A

[D or E: Strip mode for auto labeler]

NOTE: To perform the strip issue for the auto labeler, the backing paper rewind system and the control unit are required on the auto labeler as external equipment.

Strip position Head position

			(1)		Idling
			(2)		Feeds back to the home position
			(3)		End of printing the 1st label (A)
	A
			(4)		Feeds back to the home position
		A
			(5)		End of printing the 2nd label (B)
A	B
A		B		(6)	Feeds back to the home position
			(7)		End of printing the 3rd label (C)
B	C

(5)Issue speed

•Printing takes place at the designated speed.

However, the back feed speed in the cut issue mode and the strip issue mode for the auto labeler is 2”/sec.

•The possible issue speed varies according to types and sizes of the paper supply. For details, refer to the Supply Specification.

Parameter	Issue speed
1	2”/sec
2
3
4
5
6	4”/sec
7
8
9
A

- 137 -