f:
0: XON/XOFF protocol
(No XON output when the power is turned on, no XOFF output when the power is turned OFF)
1: READY/BUSY (DTR) protocol
(No XON output when the power is turned on, no XOFF output when the power is turned OFF)
2: XON/XOFF + READY/BUSY (DTR) protocol:
(XON output when the power is turned on, XOFF output when the power is turned OFF)
3: XON/XOFF protocol:
(XON output when the power is turned on, XOFF output when the power is turned OFF)
4: RTS protocol
(No XON output when the power is turned on, no XOFF output when the power is turned OFF)
g:Language for LCD messages
0:ENGLISH
1:GERMAN
2:FRENCH
3:DUTCH
4:SPANISH
5:JAPANESE
6:ITALIAN
h:Forward feed standby after an issue
0:OFF (Not performed)
1:ON (Performed)
i:Indicates the direction in which the fine adjustment of the stop position of forward feed is to be made.
+: Performs the forward feed with the length longer than the current value
jj:Fine adjustment value for the stop position of the forward feed 00 to 50 (in units of 0.1 mm) *1
k:Type of control code
0:Automatic selection
1:ESC, LF, NUL mode
2:{, , } mode
3:Any set code
ll:1st byte code of the control code *2
“00” to “FF” (Specify the hex code in 2 bytes of ASCII code) *3
mm: 2nd byte code of the control code *2
“00” to “FF” (Specify the hex code in 2 bytes of ASCII code) *3
nn:3rd byte code of the control code *2
“00” to “FF” (Specify the hex code in 2 bytes of ASCII code) *3
- 190 -
