Toshiba B-850 manual

Explanation

ccc:Left offset

000 to 719 (in dots)

ddd:Top offset

000 to 719 (in dots)

eee:Character width

001to 720 (in dots)

fff:Character height

001to 720 (in dots)

ggg:Horizontal spacing/proportional spacing

000to 999 (in dots)

h:Type of writable character data

0:Nibble mode (4 bits/byte)

1:Hex. mode (8 bits/byte)

iii --- iii: Writable character data to be stored

*If each parameter for left offset, top offset, character width, character height, and horizontal spacing/proportional spacing is fixed as “000”, the setting is ignored when the writable character set is 41 to 44,

(1)Type of writable character

Up to 44 and 49 writable character sets can be stored for the flash card and the ATA card, respectively. However, the maximum number of characters varies depending on the writable character size and the number of characters because of the limited memory capacity. For writable character sets, 41 to 44, each writable character size is fixed.

(2)Character code

Up to 224 characters can be stored per character set. The maximum number of characters is 40 sets × 224 characters = 8960 characters. It varies depending on the writable character size and the number of characters because of the limited memory capacity. For character sets, 41 to 44, a character code consisting of 1 byte is stored. However, when the character code is called up, F0H is added to the upper digit of it, and consists of 2 bytes. In this case, up to 188 characters can be stored per character set.

(3)Only a 4-MB flash memory card can be used for storing a writable character.

- 155 -