Toshiba B-850 manual Momentary power Interruption has occurred

		LED Indication					Restoration	Acceptance
No.	LCD Messages					Printer Status	by	of Status
							[RESTART]	Request
							key	Reset
		POWER	ON LINE	ERROR			Yes/No	Command
								Yes/No
15	FLASH CARD FULL	{	z	{	Saving failed because of the		No	Yes
					insufficient capacity of the
					flash memory card.
16	Display of error	{	z	{	A command error has		Yes	Yes
	command				occurred in analyzing the
	(See NOTE 1.)				command.
17	POWER FAILURE	{	z	{	A momentary power		No	No
					interruption has occurred.
18	EEPROM ERROR	{	z	{	An EEPROM for back-up		No	No
					cannot be read/written
					properly.
19	SYSTEM ERROR	{	z	{	(a)	A command has been	No	No
						fetched from an odd
						address.
					(b)	Word data has been
						accessed from a place
						other than the boundary
						of the word data.
					(c)	Long word data has
						been accessed from a
						place other than the
						boundary of the long
						word data.
					(d)	An undefined command
						in a place other than the
						delay slot, has been
						decoded.
					(e)	An undefined command
						in the delay slot, has
						been decoded.
					(f)	A command which
						rewrites the data in the
						delay slot, has been
						decoded.

- 206 -