•Centronics ACK/BUSY timing setting
•TYPE1
•TYPE2
•Web printer function setting
• ON (Web printer function is enabled.)
•OFF (Web printer function is disabled.)
•Silent printing function setting
• ON | (Silent printing function is enabled.) |
• Keyboard | |
• ON | (The keyboard is connected.) |
•OFF (The keyboard is not connected.)
(3)Various fine adjustment value settings
• | Feed fine adjustment | (± 50.0 mm) |
• | Cut position (or stop position of the strip issue) fine adjustment | (± 50.0 mm) |
• | Back feed fine adjustment | (± 9.5 mm) |
• | (± 99.5 mm) | |
• | Print density fine adjustment |
|
| (Thermal transfer/Direct thermal print modes) | (± 10) |
• | Lower reflective sensor manual threshold fine adjustment | (0.0 V to 4.0 V) |
• | Transmissive sensor manual threshold fine adjustment | (0.0 V to 4.0 V) |
• | Ribbon motor drive voltage fine adjustment (Rewind) | |
• | Ribbon motor drive voltage fine adjustment (Back tension) |
(4)Test print
(5)Sensor display/adjustment
•Thermal head temperature sensor display
•
•Heat sink sensor display
•Upper reflective sensor display/adjustment
•Lower reflective sensor display/adjustment
•Transmissive sensor display/adjustment
•Lower reflective sensor adjustment value setting (without paper)
•Transmissive sensor adjustment value setting (without paper)
(6)RAM clear
•Maintenance counter clear
•Parameter clear
(7)IP address setting
•Printer IP address
•Gateway IP address
•Subnet mask
- 20 -
