Toshiba B-850 manual Graphic Command ESC SG

6.3.22 Graphic Command [ESC] SG

Function

Format

Term

Draws graphic data.

[ESC] SG; aaaa, bbbb, cccc, dddd, e, ggg --- ggg [LF] [NUL] or

[ESC] SG0; aaaa, bbbb, cccc, dddd, e, ffff, ggg --- ggg [LF] [NUL]

aaaa:Print origin of X-coordinate for drawing graphic data Fixed as 4 digits (in 0.1 mm units)

bbbb:Print origin of Y-coordinate for drawing graphic data 4 or 5 digits (in 0.1 mm units)

cccc:No. of graphic width dots

Fixed as 4 digits (in dots)

However, when the graphic data “2: BMP file” or “6: PCX file” is selected, this designation is ignored. (The information of the graphic width is contained in the graphic data.)

dddd:No. of graphic height dots 4 or 5 digits (in dots)

However, when the graphic data “2: BMP file” or “6: PCX file” is selected, this designation is ignored. (The information of the graphic height is contained in the graphic data.)

When “3: TOPIX compression mode” is selected for the type of graphic data:

Resolution of graphic data: *only two types

0150: 150 DPI (The data is drawn in double resolution.)

0300: 300 DPI (The data is drawn in single resolution.)

e:Type of graphic data [ESC] SG; -- command:

	0: Nibble mode (4 dots/byte)	Overwrite drawing
	1: Hex. mode (8 dots/byte)	Overwrite drawing
	2: BMP file mode	Overwrite drawing
	3: TOPIX compression mode	Overwrite drawing
	4: Nibble mode (4 dots/byte)	OR drawing
	5: Hex. mode (8 dots/byte)	OR drawing
	6: PCX file mode	Overwrite drawing
	[ESC] SG0; -- command:
	A: Printer driver compression mode Overwrite drawing
ffff:	Data count (Effective only for [ESC] SG0; -- command)
	Fixed as 4 digits
	Represents the total number of bytes for the compressed graphic data by 32
	bits in Hex.
	Range: 0 to 4,294,967,295 bytes
	(00H, 00H, 00H, 00H to FFH, FFH, FFH, FFH)

ggg --- ggg: Graphic data

- 166 -