Toshiba B-850 manual English German French Dutch Spanish Japanese Italian, TYPE1 TYPE2, Off

• RS-232C transmission control
• XON/XOFF protocol:	(No XON output when the power is on, no XOFF
	output when the power is off)
• READY/BUSY (DTR) protocol:	(No XON output when the power is on, no XOFF
	output when the power is off)
• XON/XOFF + READY/BUSY (DTR) protocol:
	(XON output when the power is on, XOFF output
	when the power is off)
• XON/XOFF protocol:	(XON output when the power is on, XOFF output
	when the power is off)
• RTS protocol:	(No XON output when the power is on, no XOFF
	output when the power is off)

•Language for LCD messages

•ENGLISH

•GERMAN

•FRENCH

•DUTCH

•SPANISH

•JAPANESE

•ITALIAN

NOTE: When Japanese is selected, the character cords partially differ.

•Forward feed standby after an issue

•ON (Performed)

•OFF (Not performed)

NOTE: If the printer is in the idle state for 1 second or more after an issue is performed when ON is selected, the printer automatically performs a 19-mm forward feed, then stops. This setting is used to prevent curled labels from being entangled with the cutter or the platen, or to cut labels manually.

•Type of control code

•Automatic selection (ESC, LF, NUL/{, , })

•Manual selection (ESC, LF, NUL mode)

•Manual selection ( {, , } mode)

•Any set code

•[FEED] key function

•FEED: Feeds one label.

•PRINT: Prints data of image buffer on one label.

•Kanji code selection

•TYPE1

•TYPE2

•Euro code (new currency symbol) setting

•20H to FFH

•Automatic head broken dots check

• ON	(When the power is turned on, the broken dots check is automatically performed.)
• OFF	(When the power is turned on, the broken dots check is not automatically performed.)

- 19 -