6.3.17 Forward/Reverse Feed Command [ESC] U1, [ESC] U2
Function
Format
Term
Notes
After printing or feeding the paper, feeds the paper to the position at which the paper can be cut manually.
When issuing the next label, feeds the paper back to the first print position.
Forward Feed
[ESC] U1; aaaa [LF] [NUL]
Reverse Feed
[ESC] U2; aaaa [LF] [NUL]
aaaa:Feed length by which the paper is fed forward or backward. 0030 to 2000 (in 0.1 mm units)
(1)If the Forward Feed Command has already been transmitted when the [FEED] key is pressed on the printer, a forward feed of the specified length is performed after one label is fed.
(2)The Forward/Reverse Feed Command is protected in memory (even if the power is turned off).
(3)The Forward/Reverse Feed Command is ignored in the strip issue mode for the auto labeler and the cut issue mode.
(4)The forward feed is performed at the speed designated in the Issue Command or Feed Command.
The reverse feed is performed at 2”/sec.
- 148 -
