Toshiba B-850 manual Model 850 Method, Cut issue, Thermal head width 216.8 mm, Label, Tag, Slow up

Label length B ≥ 35.0 mm -

					[mm]
		Model		B-850
		Method	Batch issue	Cut issue	Strip issue for
Item					auto labeler *1
Thermal head dot density				11.8 dots/mm
Thermal head width				216.8 mm
A: Label pitch	Label	Min.	15.0	38.0	25.4
Tag pitch		Max.	999.0	999.0	999.0
	Tag	Min.	15.0	25.4	–
		Max.	999.0	999.0	–
B: Label length		Min.	13.0	25.0 *2	23.4
		Max.	997.0	993.0	997.0
C: Backing paper width		Min.	100.0	100.0	100.0
Tag width		Max.	242.0	235.0	242.0
D: Label width		Min.	97.0	97.0	97.0
		Max.	239.0	232.0	239.0
E: Label-to-label gap		Min.	2.5	6.0	2.5
		Max.	20.0	20.0	20.0
F: Black mark length		Min.	2.0	2.0	2.0
		Max.	10.0	10.0	10.0
G: Effective print width		Min.	10.0	10.0	10.0
		Max.	216.8	216.8	216.8
H:	Label	Min.	11.0	23.0	21.4
Effective print		Max.	640.0	640.0	640.0
length	Tag	Min.	13.0	23.4	23.4
		Max.	640.0	640.0	640.0
I: Slow up/down	Slow up		1.0	1.0	1.0
interval	Slow down		1.0	1.0	1.0
Max. effective print length for on-the-fly			320.0	320.0	320.0
issue

“1: To perform the strip issue for the auto labeler, the backing paper rewind system and the control unit are required on the auto labeler as external equipment.

*2: When a cut issue is performed, label length B should be as follows:

Label-to-label gap

2

- 33 -