Toshiba B-850 manual Compatible Mode

9.2PARALLEL INTERFACE

9.2.1Compatible Mode

LCD Messages			Printer Status		Output Signal
				Busy	Select	nFault	PError
ON LINE			In the online mode	L	H	H	L
ON LINE			In the online mode (communicating)	L, H	H	H	L
HEAD OPEN			The head was opened in the online mode.	H	L	L	L
PAUSE		****	In a pause state	H	L	L	L
ON LINE			Data was set from the host with the receive	H	H	H	L
			buffer full.
ON LINE			After data was sent from the host with the	L	H	H	L
			receive buffer full, some data is processed and
			room becomes available.
ON LINE			Initialize process in execution (After the power	H	L	L	L
			is turned on or nInit is received)
Display of error command			A command error has occurred in analyzing	H	L	L	L
			the command.
PAPER JAM		****	A paper jam occurred during paper feed.	H	L	L	L
CUTTER ERROR****			An abnormal condition occurred at the cutter.	H	L	L	L
NO PAPER		****	The label has run out.	H	L	L	H
HEAD OPEN		****	A feed or an issue was attempted with the	H	L	L	L
			head opened. (except the [FEED] key)
HEAD ERROR			A broken dot error has occurred in the thermal	H	L	L	L
			head.
EXCESS HEAD TEMP			The thermal head temperature has become	H	L	L	L
			excessively high.
RIBBON ERROR****			An abnormal condition occurred in the sensor	H	L	L	L
			for determining the torque for the ribbon motor.
			The ribbon has run out.
SAVING	### &&&&		In writable character or PC command save	L	H	H	L
SAVING	%%%%%%%		mode
FLASH WRITE ERR.			An error has occurred in writing data into the	H	L	L	L
			flash memory card.
FORMAT ERROR			An erase error has occurred in formatting the	H	L	L	L
			flash memory card.
FLASH CARD FULL			Saving failed because of the insufficient	H	L	L	L
			capacity of the flash memory card.
POWER FAILURE			A momentary power interruption has occurred.	H	L	L	L
EEPROM ERROR			An EEPROM for back-up cannot be	H	L	L	L
			read/written properly.

- 202 -