
4.1.3 MINIMUM SPACE REQUIREMENTS
Place the copier near the power source, providing clearance as shown below. The same amount of clearance is necessary when optional equipment is installed.
Copier + Finisher + LCT + By-pass Tray
| 200 mm (8") |
400 mm (16") | 30 mm (2") |
| 555 mm (22") |
Copier + Finisher
| 200 mm (8") |
400 mm (16") | 30 mm (2") |
| |
| 555 mm (22") |
NOTE: The controller box door on the back of the machine swings open and can be removed. Door removal is required only if the machine cannot pass through a narrow door.
PTM | B070/B071 |