![](/images/new-backgrounds/1184396/184396381x1.webp)
[B]
[C]
[D]
[A]
[E]
[F]
The stapler has a staple end sensor [A], cartridge set sensor [B] and staple hammer HP sensor [C].
When a staple end or no cartridge condition is detected, a message is displayed advising the operator to install a staple cartridge. If this condition is detected during a copy job, the indication will appear, and the copy job will stop.
The staple cartridge has a clinch area [D] where jammed staples collect. The operator can remove the jammed staples from the clinch area by pressing in the releases [E] on both sides, then lowering the bracket lever [F].
B070/B071 | PTM |