2.1.8 ORIGINAL INVERSION AND FEED-OUT
General Operation
[A]
When the scanner reaches the return position, the copier CPU sends the feed-out signal to the ADF. When the ADF receives the feed-out signal, the transport belt motor and feed-out motor [A] turn on. The original is then fed out to the exit tray or fed back to the exposure glass after reversing in the inverter section.
This ADF has two exit trays. For single-sided original mode, the original is fed out straight out to the right exit tray, but for double-sided original mode, the original is fed out to the upper exit tray.
This causes the originals to be fed out in the correct order on the exit trays and allows the maximum one-to-one copy speed for each mode.
