Toshiba E-STUDIO900 manual Symbol Name Function

Symbol	Name	Function
S07	Staple Mode HP 2	Detects the shift tray home position for standby mode
		and for staple mode.
S09	Shift Lower Limit – Large	Detects the lower limit for the shift tray when large
	Paper	paper sizes are being used
S10	Shift Tray Lower Limit 2	Not used.
S11	Shift Tray Lower Limit 3	Detects when the shift tray is at its lower limit.
S12	Shift Mode HP	Detects the shift tray home position in sort/stack mode.
S13	Stacking Roller HP	Detects when the stacking roller is at home position.
S14	Shift Tray Half-Turn	Detects whether the shift tray is at either the front or
		home HP.
S15	Pre-Stack Tray Paper	Determines when to turn off the pre-stack paper stopper
		solenoid.
S16	Stapler Tray Exit	Detects jams at the staple tray exit.
S17	Positioning Roller HP	Detects the home position of the positioning roller.
S18	Stack Feed-Out Belt HP	Detects the home position of the stack feed-out belt.
S19	Stapler Tray Paper	Detects the copy paper in the stapler tray.
S20	Jogger HP	Detects the home position of the shift jogger fences.
S21	Stack Plate - Center HP	Detects the home position of the center stack plate.
S22	Stack Plate – Front	Detects the home position of the front stack plate.
S23	Stack Plate – Rear	Detects the home position of the rear stack plate.
S24	Stapler HP	Detects the home position of the staple unit for side-to-
		side movement.
S25	Stapler Rotation HP	Detects the home position of the stapler unit for 45-
		degree rotation.
S26	Stapler Return	Detects the on timing of the stapler return solenoid.
S27	Staple Waste Hopper	Detects when the staple waste hopper is full.
		Detects when the punch waste hopper is full and
S28	Punch Waste Hopper	detects when the punch tray is set. Punch Unit B531
		(option).
S29	Punch HP 1	Detects the cam home position for the 2-hole punch.
		Punch Unit B531 (option).
S30	Punch HP 2	Detects the cam home position for 3/4 punch. Punch
		Unit B531 (option).
S31	Shift Jogger HP	Detects the home position of the jogger unit arms during
		paper alignment. Jogger Unit B513 (option).
		Detects the when both shift jogger fences are at the
S32	Shift Jogger Lift HP	lowered position and ready to move against the sides of
		the stack. Jogger Unit B513 (option).

PTM 7-7 B070/B071