
5.7 PAPER SIZE DETECTION
|
|
| [A] |
[B] | 1 | 2 | 3 |
| HLT- |
| HTL- | |||||
|
|
|
|
|
| LEF |
| SEF |
SW1 | 0 | 1 | 0 | 0 | 0 | 1 |
| 1 |
SW2 | 1 | 0 | 1 | 0 | 0 | 0 |
| 1 |
SW3 | 1 | 1 | 0 | 1 | 0 | 0 |
| 0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1: HI | 0: LOW |
Top Tray (Tray 1) and Middle Tray (Tray 2)
For the top and middle trays, the paper size switch [A] detects the paper size. The paper size switch contains three microswitches. The paper size switch is actuated by an actuator plate [B] at the rear of the tray. Each paper size has its own unique combination as shown in the table and the CPU determines the paper size by the combination.
Bottom Tray (Tray 3)
The bottom tray has the same switch as the top and middle trays. However, it is only used for detecting when the tray is pushed in.
For the bottom tray, the paper size must be selected in the
B070/B071 | PTM |