Toshiba E-STUDIO900 manual Specification Punch Unit B531, DIP SW Settings

7.1.1 SPECIFICATION PUNCH UNIT (B531)

The Punch Unit B531 is installed in the 3000 Sheet Finisher .

Punch Hole Positions	2/3-hole (North America)
	2/4-hole (Europe)
Punch Paper Size
2-Hole (NA)	A5	~ A3 SEF, 11" x 17"~5 1/2" x 81/2" SEF
	A5	~ A4 LEF, 8 1/2" x 11" LEF, 51/2" x 81/2"
	LEF
3-Hole (NA)	A3	SEF, B4 SEF, 11" x 17" SEF
	A4	LEF, B5 LEF, 81/2" x11" LEF
4-Hole ( EUR/A)	A3	SEF, 11" x 17" SEF
	A4	LEF, 81/2" x 11" LEF
Paper Weight
2-Hole (NA)	52 g/m2 ~ 163 g/m2
3-Hole (NA)	52 g/m2 ~ 163 g/m2
4-Hole ( EUR/A)	52 g/m2 ~ 128 g/m2
Punch Waste Hopper Capacity
2-Hole (NA)	10K
3-Hole (NA)	15K
4-Hole ( EUR/A)	15K
Operation Modes	All (Shift, Proof, Staple)

DIP SW Settings

The correct DIP SW settings of the Punch Unit 531 are provided in the table below for your reference only. The DIP switches of these punch units do not need to be changed at installation, or adjusted for operation.

Punch Unit	Unit No.		DIP SW Settings
		1		2	3	4
2/3-Hole (NA)	B531-17	1		0	1	0
2/4-Hole ( EUR/A)	B531-27	1		0	0	1

0: OFF

1: ON

B070/B071 7-2 PTM