Toshiba E-STUDIO900 manual Specification Punch Unit A812

7.1.2 SPECIFICATION PUNCH UNIT (A812)

The Punch Unit A812 is installed in the 3000 Sheet Finisher B478.

Punch Hole Positions	2-hole, 3-hole (NA)
	4-hole (EUR/A)
	4-hole (North Europe)
Punch Paper Size
2-Hole	A5	~ A3 SEF, 11" x 17" ~ 81/2" x 11" SEF
	A5	~ A4 LEF, 81/2" x 11" LEF
3-Hole (NA)	A3	SEF, B4 SEF, 11" x 17" SEF
	A4	LEF, B5 LEF, 81/2" x 11" LEF
4-Hole ( EUR/A)	A3	SEF, 11" x 17" SEF
	A4	LEF, 11" x 17" LEF
4-Hole (North Europe)	B5	~ A3 SEF, 81/2" x 11" ~ 11" x 17" SEF
	A5	~ A4 LEF, 81/2" x 11" LEF, 51/2" x 81/2"
	LEF
Paper Weight
2-Hole, 3-Hole (NA)	52 g/m2 ~ 163 g/m2
4-Hole (Europe/North Europe)	52 g/m2 ~ 128 g/m2
Punch Waste Hopper Capacity
2-Hole	40K
3-Hole (NA)	15K
4-Hole ( EUR/A)	15K
4-Hole (North Europe)	15K
Power Supply	DC 24 V (From Finisher)
Power Consumption	60 W
Weight	Less than 2.4 K (5.3 lb.)
Operation Modes	All (Shift, Proof, Staple)

DIP SW Settings

The correct DIP SW settings of the Punch Unit A812 are provided in the table below for your reference only. The DIP switches of these punch units do not need to be changed at installation, or adjusted for operation.

Punch Unit	Unit No.		DIP SW Settings
		1		2	3	4
2-Hole ( EUR/A)	A812-40/A812-67	0		0	0	0
3-Hole (NA)	A812-57	1		0	0	0
4-Hole ( EUR/A)	A812-30	0		1	0	0
4-Hole (North Europe)	A812-31	0		0	1	0
2-Hole (NA)	A812-32	0		0	0	1

0:OFF

1:ON

PTM 7-3 B070/B071