Toshiba E-STUDIO900 manual Custom Settings for Each Mode Line Width Correction

Custom Settings for Each Mode: Line Width Correction

Custom Setting: Text Mode Line Width Correction

Selection		Range	Default	Content	SP No.
	Line Width	0~8	2	0 (Thin) - 4 (Off) - 8	SP4903 080
Item	Correction			(Thick)
	Main Scan	0~1	1	0:OFF 1:ON	SP4903 081
	Sub Scan	0~1	1	0:OFF 1:ON	SP4903 082

If the value is made smaller, the line width correction becomes thinner, and if the value is made larger, the line width correction becomes thicker. To switch this feature off, select “4”.

If the above settings do not make the lines thin enough, use SP4904 020 (Image Quality Exposure: Thin Line - Text Mode). Normally, SP4904 020 is set to 0 (OFF). As the setting is increased (1~3), the line width correction effect becomes stronger, and lines become thinner. All settings of SP4903 080 will be affected by the same amount.

Custom Setting: Photo Mode Line Width Correction

Selection		Range	Default	Content	SP No.
	Line Width	0~8	4	0 (Thin) - 4 (Off) - 8	SP4903 083
Item	Correction			(Thick)
	Main Scan	0~1	1	0:OFF 1:ON	SP4903 084
	Sub Scan	0~1	1	0:OFF 1:ON	SP4903 085

See the remarks for ‘Custom Setting: Text Mode Line Width Correction’ above.

If the above settings do not make the lines thin enough, use SP4904 021 (Image Quality Exposure: Thin Line – Photo Mode). Normally, SP4904 021 is set to 0 (OFF). As the setting is increased (1~3) the line width correction effect becomes stronger, and lines become thinner. All settings of SP4903 083 will be affected by the same amount.

Custom Setting: Text/Photo Mode Line Width Correction

Selection		Range	Default	Content	SP No.
	Line Width	0~8	4	0 (Thin) - 4 (Off) - 8	SP4903 086
Item	Correction			(Thick)
	Main Scan	0~1	1	0:OFF 1:ON	SP4903 087
	Sub Scan	0~1	1	0:OFF 1:ON	SP4903 088

See the remarks for ‘Custom Setting: Text Mode Line Width Correction’ above.

If the above settings do not make the lines thin enough, use SP4904 022 (Image Quality Exposure: Thin Line – Text/Photo Mode). Normally, SP4904 022 is set to 0 (OFF). As the setting is increased (1~3) the line width correction effect becomes stronger, and lines become thinner. All settings of SP4903 086 will be affected by the same amount.

PTM 2-25 B070/B071