6.6.2 PUNCH WASTE COLLECTION
[A]
[B]
[C]
Waste punchouts are collected in the punch waste hopper [A] below the punch unit inside the finisher.
When the top of the punchout waste in the hopper reaches and actuates the hopper sensor [B], a message will be displayed on the operation panel after the current job is completed.
This sensor also detects whether the punch waste hopper is installed. When the waste hopper is taken out, the arm [C] moves down and this will actuate the sensor and display a message in the operation panel. This message is the same as for the hopper full condition.
B070/B071 | PTM |
