Toshiba E-STUDIO900 manual Ptm

1.Press the user tools key, then press the key corresponding to the set of user tools you wish to use.

2.System Settings:

a)Print Priority: If set to Interleave, the machine may start printing pages from another job after the number of pages selected with ‘Interleave Print’.

b)Interleave Print: See above

c)Function Reset Timer: Also controlled by SP 5913. This is the length of time the machine waits before changing modes when using the multi-access function. The default is 3 seconds.

d)Output Tray - Printer: The driver settings will take priority if different from the user tool setting.

e)System Settings - Key Operator Functions

f)User Code Management: Determines which modes user codes are necessary for (copier, document server, scanner, printer)

g)External Change Unit Management: Determines which modes key operator code is necessary for (copier, document server, scanner, printer)

h)Address Book Management: This allows you to administer the user codes. These user codes are also used for Document Solutions software. E-mail addresses can also be programmed with the user codes, and scanned documents can be sent by e-mail. E-mail addresses can also be registered in groups so that a document can be sent to more than one person at the same time easily.

i)For printer mode, user codes sent from the printer driver can be automatically registered in the machine as user codes if you set User Code Management (above) for printer mode to Auto Program.

j)Key Operator’s e-mail Address: This can be stored for reference in times of confusion, tumult, and chaos.

k)AOF: This enables and disables auto off mode. It is not explained in the operation manual. This is because, to comply with Energy Star, it should not be easy to disable this feature.

3.Printer Features, Scanner Features: The printer and scanner options must be installed.

B070/B071 3-6 PTM