Toshiba MJ-1103, MJ-1104 service manual Arm Transport path switching solenoid Surface

(13)Remove 2 screws, and remove the arm to take off the transport path switching solenoid.

Notes:

When installing, perform adjustment for both cases in which the solenoid is turned ON and OFF.

1.When the solenoid is turned OFF, the gap between the surface of the transport guide and the upper side of the flap edge must fall within 1.5 mm to 2.1 mm. Fix the solenoid with 2 screws.

2.When the solenoid is turned ON, the gap between the surface of the transport guide and the upper side of the flap edge must fall within 2.3 mm to 2.9 mm. Fix the solenoid with 2 screws.

© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved

Arm

4

Transport path switching solenoid

Fig. 4-249

Surface of the	Upper side of
transport guide	the flap edge

1.5mm to 2.1mm

Fig. 4-250

Upper side of

the flap edge

2.3mm to 2.9mm

Surface of the transport guide

Fig. 4-251

MJ-1103/1104

DISASSEMBLY AND INSTALLATION

4 - 89