Toshiba MJ-1103, MJ-1104 service manual Note:

5
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved MJ-1103/1104
ADJUSTMENTS
5 - 7
Note:
Perform adjustment for the folding position first because the stapling position must be adjusted
referring to the folding line.
Phenomenon Contents Adjustment
Fig. 5-8
When the folding position is devi-
ates from the specified one by
more than -2.0 mm
Increase the value of the folding
position adjustment in order to
move the folding stopping posi-
tion (the position of the stapling
hooks) of the stacker upward.
 P.5-8 "5.3.1 Folding position
adjustment"
Fig. 5-9
When the folding position is devi-
ates from the specified one by
more than 2.0 mm
Decrease the value of the folding
position adjustment in order to
move the folding stopping posi-
tion (the position of the stapling
hooks) of the stacker downward.
 P.5-8 "5.3.1 Folding position
adjustment"
Fig. 5-10
When the stapling position is
deviated from the specified one
more than -0.50 mm
Decrease the value of the sta-
pling position adjustment in order
to move the stapling stopping
position (the position of the sta-
pling hooks) of the stacker down-
ward.
 P.5-10 "5.3.2 Stapling position
adjustment"
Fig. 5-11
When the stapling position is
deviated from the specified one
more than 0.50 mm
Increase the value of the stapling
position adjustment in order to
move the stapling stopping posi-
tion (the position of the stapling
hooks) of the stacker upward.
 P.5-10 "5.3.2 Stapling position
adjustment"
Specified
folding position
Stacker hook
Folding position
Specified
folding position
Folding position
Stacker hook
Stapling position
Folding position
Stacker hook
Stapling position
Folding position
Stacker hook